Login | Register | 中文| English        
 
  E-Mail Address: Password: Forgot your password?
I am a new customer
OKYLink>>Products>>Cables>>Audio & Video Series>>Speaker Cables>>WSKxxxxx-O
All drawings/Spec. subject to change without notice.
Drawing Product spec.
   
Model Number  WSKxxxxx-O
[PRINT PAGE]   [EMAIL TO A FRIEND]
Oxygen-Free Copper Speaker Wire Cable
Cable Type: Loudspeaker cable
Clear PVC outer jacket.
Two conductor cable w/ crear stripe for matching polarity

Features
Specially designed, high purity, oxygen free copper for wide frequency range, low signal loss and enhanced emphasis on the low end for loud, clear and bold audio reproduction. Cmple speaker cables bring you the high quality, great performance and excellent value you’ve come to expect from us.

Perfect for high end speakers. Good for use with banana plugs.
Clear PVC outer jacket.
Two conductor cable w/ crear stripe for matching polarity

    Conduit: High Purity, Oxygen-free Copper 
    PVC color: Clear 
    Designed & constructed for improved signal transfer & dynamic range 
    Polarity markers: Yes, crear 
    Packaging: Rolled on Spool w/ PE wrap

Resolution Comparison Chart
 

Oxygen-Free Copper Speaker Wire Cable _ construction

OKL P/N  Conductor Core Number Jacket Insulation resistance
 AWG   Specification
(mm)
 Material Material OD (NOM.mm) Colour (20 ℃) Min
 WSK122F
047-O
 12 87/0.19  CCA / CCS / BC / TC 2C PVC or LSZH 4.7*9.4 Clear 0.75Ω/KM
 WSK142F
040-O
 14 75/0.19  CCA / CCS / BC / TC  2C  PVC or LSZH 4.0*8.3 Clear 0.75Ω/KM
 WSK162F
038-O
 16 45/0.19  CCA / CCS / BC / TC  2C  PVC or LSZH 3.8*7.4 Clear 0.75Ω/KM

 
     
     

Speaker Cable Selection Guide

AWG 4 Ohm Speaker 8 Ohm Speaker 70V Speaker
Power (%) / 11%
.5Loss (dB/Ft.)

11%
0.5

21%
1.0
50%
3.0

11%
0.5

21%
1.0
50%
3.0

11%
0.5

21%
1.0
50%
3.0
12 140 305 1150 285 610 2285 6920 14890 56000
14 90 195 740 185 295 1480 4490 9650 36300
16 60 125 470 115 250 935 2840 6100 22950
The number of feet of cable you can run for a given loss and performance budget.

How to Use the Guide

Step One Select the appropriate speaker impedance column.
Step Two Select the appropriate power loss column deemed to be acceptable.
Step Three Select the applicable wire guage size and follow the row over to the columns determined in steps one and two. The number listed is the maximum cable run length.
Example The maximum run for 12 AWG in a 4 Ohm speaker system with 11% or .5 dB loss is 140 ft.

*70 volt line drive systems, while considered a potential for Hi-Fi performance, follow the same cable loss physics
as the higher current (lower impedance) system. For the sake of this calculation a 25 watt 70 volts system (196Ω)
was used.

                         

<< Previous Page || Next Page >>
Copyright © 2009-2015 OkyLink. All rights reserved Home | Contact Us | Legal Notices | Products notices | Sitemap | Link